Experienced Leadership

 

Nash Williams

Founder & President

Nash Williams founded National Welding Corporation in 1997. Nash currently serves as President of National Welding Corporation and chairman of American Water Works Association (AWWA) Standards for Field Welding of Steel Water Pipe (C206) and chairman for Installation of Steel Water Pipe (C604) which are nationally recognized Standards. He also serves as chairman of the Welding Chapter “Steel Penstocks” published by the American Society of Civil Engineers (ASCE) and has written, presented and published numerous papers for ASCE. Nash attended the University of Utah in Mechanical Engineering and is a Certified Welding Inspector (CWI) by the American Welding Society. Upon entering the construction industry he applied his practical and business knowledge to develop a specialty construction company focused on welded steel projects. He leads with an emphasis on integrity and performance which has become a practice that extends throughout the company and acts to keep our clients coming back.

 

Bryan Hansen

Vice President Operations

Bryan Hansen currently serves as the Vice President of Operations at National Welding Corporation and as a Standards Co-Chair and Committee Member on several American Water Works Association (AWWA) Standards including AWWA Standards for Field Welding of Steel Water Pipe (C206) and Installation of Steel Water Pipe (C604) which are nationally recognized Standards. He has written, published and presented numerous papers for North American Tunneling (NAT), Miller Case Studies and has presented as a speaker to engineering firms. Bryan graduated from Utah State University in Mechanical Engineering and is a Certified Welding Inspector (CWI) by the American Welding Society and member of the American Society of Mechanical Engineers and Society of Mining Engineers. Bryan has been in management of National Welding for 12 years and as the current Vice President of Operations he oversees most of the company’s operations including marketing, contract negotiation, estimating and strategic planning.

 

Gedas Grazulis

Operations/Welding Engineer

Gedas currently serves as the Manager of Specialty Projects and as the Welding Engineer for National Welding Corporation. Gedas graduated from Weber State University in Manufacturing Engineering with an emphasis in welding and is a Certified Welding Inspector (CWI) by the American Welding Society. He has written, presented and published numerous papers for the American Society of Civil Engineers (ASCE) including subjects on steel pipelines and steel tunnel liners 4’ diameter to 33’ diameter. He has been with National Welding for 10 years and has considerable experience on the practical side of our work plus the technical side regarding submittals, specifications and code issues. This combination of experience and education has provided the ability to innovate unique construction techniques and recognize constructability problems in advance of the need. He often prepares CAD modeling to evaluate our options and potential conflicting issues.

 

Jeff Green

General Superintendent

Jeff Green is the General Superintendent at National Welding Corporation and has developed a vast amount of knowledge having been with National for over 19 of our 20 years. National has installed, assembled or welded over 200 heavy civil welded steel projects throughout the United States from Alaska to Florida including 40 States and Jeff has been directly or indirectly involved in many of these projects. Jeff oversees most of the hiring, training and logistics of our welding crews (who apparently save the world one weld at a time according to his LinkedIn profile). He sets up projects, monitors work progress and visits most of our projects on an intermittent basis just to make sure all is well. Jeff has a “get it done” attitude that motivates our crews to continue to deliver the high level of performance National Welding provides.

 

Jared Bradfield

Operations Engineer

Jared is the Operations Engineer at National Welding and has been with National for nearly 4 years. He graduated from Southern Utah University with a degree in Construction Management and began work for National as the Assistant Manager on our largest diameter steel tunnel liner which was 33 feet in diameter and located 300 feet underground in Chicago, IL. After Chicago, he went on to several other similar projects elsewhere in the country. Since the start Jared has excelled at problem solving and managing the logistics on complex work. Having experienced our real world conditions, Jared is uniquely qualified to prepare many of our proposals and estimates while spear heading the bid opportunities. He also shares the responsibility of constructions logistics, setup and oversite on many projects.

 

Julie Scott

Office Manager

Julie is the Office Manager at National Welding and has intimate understanding of our operations having been with National for 16 of our 20 years. Julie came to National with a strong background in accounting and general operations and has excelled at putting these talents to great use at National. She is responsible for overseeing our daily accounting needs including payroll, accounts receivable and accounts payable. In addition, Julie locates and sets up new vendors and handles much of the travel logistics for the employees.

 

Kim Kimura

General Accountant

Kim is the General Accountant at National Welding and has been with our company for 19 of our 20 years. Kim graduated from Ball State University with a degree in accounting and came to National with a strong history in general accounting and accounting principles. She oversees our general accounting and tax issues required from our multi-State operations. In addition, Kim handles setting up the unions and benefit programs which vary around the Country.